DTS XR 8 Wash Bedienungsanleitung

GBMade in ItalyXR8 WASHUser’s Manual Rel 1.1D.T.S. Illuminazione srl - ITALY http://www.dts-lighting.itXR8 WASH (Cod. 03.MW001.L)• Electromagnetic bal

7.1-DMX AddressesXR8 Wash have 16 DMX channels.Set the following addresses on the mixer:Projector 1 A001Projector 2 A017 If you want to select the nex

DMX INDMX OUTDISPLAY8- DISPLAY FUNCTIONSMENUENTERDOWNUPDISPLAY FUNCTIONSThe XR8 display panel shows all the available functions . Using these function

MENU ENTERTEST MODEFull test and single function test. Up-DownUp-DownMENUENTERDEFAULT To restore default setting ENTERUp-DownMENU ENTERFan controlTo c

MENUUp-DownENTERRESERVEDPan lock-Tilt lockPan free-Tilt freeUp-DownENTER.Up-DownENTERUp-DownENTERENTERUp-DownENTERENTERUp-DownENTERUp-Down.ENTERENTERE

9- PAN & TILT SPEED (SPEE) (default: 2)10- FAN SPEED (FANS)( default: 12)You can set the PAN and TILT motors at high speed on your XR8.Press menu

1612- HIDDEN MENUFor technical personnel only.To operate this menu:-Connect the projector to the DMX controller (DMX SIGNAL MUST BE CORRECTLY RECEIVED

13- OPENING THE PROJECTOR HOUSINGIt is possible to inspect the inside of the projector by removing the cover as indicated below.ATTENTIONREMOVE MAINS

16- DMX PROTOCOL 16 CHANNEL MODE ( 16bit) 1 PAN ms b ( 5 4 0°) 2 3 TILT msb(320°)4 TILT l s b 5 6 D IM MER7 SHU T T ER8

- - ARC 1200 DMX CHANNEL 7 Parameter: SHUTTER DMX range Value Mid point DMX value Move range (degrees) Mode Option Function 0-9 Black-out

-ARC 1200210-212 Right rotation speed 5 213-215 Right rotation speed 6 216-218 Right rotation speed 7 219-221 Right rotation speed 8

Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventual

-ARC 1200XR8 WASHDMX CHANNEL 13 Parameter: MACRO CMY / COLOUR DMX range Value Mid point DMX value Move range (degrees) Mode Option Function

-ARC 1200 DMX CHANNEL 14 Parameter: EFFECTS DMX range Value Mid point DMX value Move range (degrees) Mode Option Function 0-19 No effect

0507C042.D01GREEN WB50550507C051.D01ORANGE LW5900507C041.D01DARK BLUE SW490COL6COL5COL4COL3COL2COL7COL80507C047.D01RED LW 640 -ARC 1200 17- COLOUR WH

18- MOTORS CONTROL CARDXR8 WASHFans+-GNDORANGEBROWNVCC30 VDCJ1 Internal DATA CommunicationConnectorFrom J8 Pan & Tilt cardFansJ7 Magnetic Sensor

19-PAN & TILT CARDDATA 1DATA 2(VIOLET)(LIGHT GREEN)MOTOR TILT (BROWN)DISPLAY 1DISPLAY 2ENCODER TILT(ORANGE)21-DISPLAY CARDV1V1TCN0060CN7FROM J16PA

ARC 120025XR8 WASHNOTES

ARC 120026XR8 WASHNOTES

ARC 120027XR8 WASHNOTES

The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any err

ARC 1200INDEX:1- TECHNICAL FEATURES 42- IMPORTANT SAFETY INFORMATION 52.1 Fire prevention2.2 Prevention of electric shock2.3 Protection against ultra

ARC 12001- TECHNICAL FEATURESThe XR8 Wash is fitted with a Philips MSR 575/2 discharge lamp (GX9,5 lampholder base), with a colour temperature of 7,20

2- IMPORTANT SAFETY INFORMATION 2.1 Fire prevention: The use of any other alternative lamp is not recommended and will null and void the fixture'

3- MOUNTING THE LAMPSWarning: Switch off the unit before replacing the lamp.1) Using a screwdriver, remove the 3 screws A,B, C, (photo 1) which fix th

4- VOLTAGE AND FREQUENCYThe XR8 with electromagnetic ballast can operate at 5- INSTALLATIONXR8 may be either floor or ceiling mounted.For floor mounti

5.3- MovementThe projector has a maximum movement of 540° for Pan and 270° for Tilt. DO NOT place any obstructions in the path of the projector's

Ensure that the conductors do not touch each other.Do not connect the cable ground to the XLR chassy The plug housing must be isolated. Connect the m