DTS PRO Series Betriebsanweisung PDF herunterladen (Seite 33)

DTS-HD Master Audio Suite™,

User Guide

v 2.5

Confidential - Do NOT Duplicate 25 DTS Document No.: 9301F55800D

17781 v1

Figure 7-6 Input Files Section (Stereo and Mono Case)

Bw and Fs – Bit width Resolution and Sampling Frequency of Audio Channels

All audio files entered for any channel layout must have the same bit-width resolution (Bw) and sampling

frequency (Fs).

Note: If the sample rate of the input material does not match the selected sample rate in the

Sample Rates drop-down menu, when the ‘Encode” button is selected, an error message will be

displayed indicating that there is a mismatch. Unless the error is corrected, the user will not be

able to create an encoded file.

Clear All

Located below the Input Files section of the GUI, the

button will unload all active input

files from their related channel inputs when clicked.

7.2.9 Dialog Normalization

Located in the upper right side of the Audio panel, the Dialog Normalization menu allows a value to be

selected for the specified encode (as shown in Figure 7-7). These values range from -1 to -31 dBFS

LeqA. The default value is -31 dBFS LeqA, which corresponds to no attenuation, in effect turning dialog

normalization OFF. At current, all 6.x Discrete channel layouts require a -31 dBFS Dialog Normalization

setting. Dialog Normalization is a post-process operation performed by the DTS decoder. DTS

recommends leaving the Dialog Normalization setting at -31.

Figure 7-7 Dialog Normalization

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 107 108

Keine Kommentare

DTS PRO Series Betriebsanweisung Seite 33