DTS XD10 Spezifikationen Seite 134

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 152
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 133
XD10 Cinema Media Player, Installation and Operating Guide Version 1.0
Caution: Use cleaner sparingly – do not use too much. Do not apply cleaner directly to the
lens (instead, apply to the cloth). Do not use abrasive cleaners, solvents or other harsh
chemicals that may scratch the lens.
2. Lightly wipe the cleaning cloth over the lens in a circular motion.
3. Verify the focus and zoom adjustments after cleaning is finished.
G.7. Replacing the Lamp Module
Warning: To avoid burns, allow the projector to cool for at least 30 minutes before you open
the lamp module door. Never extract the lamp module while the projector is operating.
Warning: To avoid eye injury, do not look directly into the projected light beam.
The lamp hour counter in the CSP Lamp Status menu displays the number of hours the lamp has been in
use. Change the lamp when the brightness is no longer acceptable or after 1400 hours. The XD10 front
panel features a CSP Lamp Fault indicator that will flash (red) when the lamp needs replacing. The
indicator will light continuously (not flashing) in case of lamp failure.
The lamp must be changed at 1400 hours and the lamp hour counter must be reset every time the lamp
module is changed. Contact DTS to order a new lamp module. See “Replacement Parts List” in this
section.
Tool Required: 1/4 inch (0.5 cm) flat blade screwdriver
1. Turn off the projector and unplug the power cord.
2. Wait 30 minutes to allow the projector to cool thoroughly.
3. Push the ridge on the lamp door toward the back (see figure below). The arrow on the lamp door
should point to the unlock icon on the bottom of the projector. Lift the door up.
Caution: Never operate the projector when the lamp door is open or removed. This disrupts
the airflow and will cause the projector to overheat.
Cinema Subtitling (CSS) Option Document #: 9301E692001.0
G-18
Seitenansicht 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare