DTS XD10 Spezifikationen PDF herunterladen (Seite 52)

XD10 Digital Playback System, Installation and Operating Guide Version 1.0

2.3.1. DTS XD10 Interaction with Other Cinema Processors

In general, the XD10 is not compatible with older cinema processors (manufactured 1993 and

earlier) unless the processors have been modified.

See Appendix B for interconnect and cable diagrams.

2.3.1.1. Dolby CP200 Operation

When the DTS XD10 switches to digital, the normal signal paths are interrupted, and DTS signals are

inserted just prior to the Dolby EQ cards, in effect taking over the cinema processor.

CP200: Program the automation optical default format to either “04” A-TYPE or “05” SR –

whichever the film requires.

When the DTS XD10 switches out of digital, the cinema processor is released and reverts to the format

previously selected.

Unless modified, these cinema processors do not have a subwoofer input. In this case, DTS inserts the

subwoofer signal post-fader; the fader or mute will not affect the subwoofer level.

2.3.1.2. Dolby CP45, CP55, CP65, CP500, CP650, UltraStereo JS Series, and SMART

Operation

The DTS XD10 will automatically pulse the audio processor to the digital format when it starts to play a

digital sound track. Whenever the XD10 drops out of digital, a pulse will be sent to switch the audio

processor back to optical format.

The DTS-XD10 will only pulse the audio processor into digital format when it first switches to digital.

Set the automation/cues to disallow audio format change once the DTS has switched into digital (for

example, when the show is re-started after a film break).

CP500: Must have the Cat. 685 (analog input card) installed. DTS is normally accessed through

Format 11.

SMART: Mod VI and VII uses the DTS interface cable E709.

For other SMART cinema processors, contact Smart directly at (800) 45-SMART or

+1.770.449.6698.

2.3.1.3. Dolby DA10 / 20 SR-D™ System

The DTS XD10 can be connected to the Dolby SR-D™ system without affecting performance of the

Dolby system. The DA20 connects to the appropriate XD10 breakout board. When the XD10 is off, the

DA10/20 output is routed through the breakout board. When the XD10 system is on and playing in

digital, the DA10/20 connection (to the cinema processor) is switched out on the breakout card and the

DTS digital sound track is given to the cinema processor. The SR-D™ system should be powered down

when playing DTS.

2.3.1.4. Sony SDDS™

The DTS XD10 system does not connect to, and has no affect on, the DFP-D2000 and DFP-D2500. It

does connect to the DFP-D3000 and could be connected to a DCP1000. See the cable and interface

drawings in Appendix B.

Installation Document #: 9301E692001.0

2-4

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 151 152

Keine Kommentare

DTS XD10 Spezifikationen Seite 52