DTS XD10 Spezifikationen PDF herunterladen (Seite 148)

TITLE

Cleaning the CSP Lamp Module Dust Filter

NUMBER

E538

REV

Page

1 of 3

DATE PREPARED

7/02/2002

CREATED BY:

K. Hultgren

EFFECTIVE DATE

7/02/2002

APPROVED BY:

B. Plunkett

DTS, 5171 Clareton Dr., Agoura Hills, CA 91301 Contact Document Control for the latest revision

Maintenance to Prevent Premature DTS-CSP Lamp Failure

In dirty or dusty environments, the lamp module dust filter screen in the DTS-CSP projector can become

plugged, causing excessively high temperatures inside the lamp module. Excessively high temperatures

can cause premature lamp failure. Routine maintenance to remove dust and dirt from the filter screens

lowers the lamp operating temperature and lengthens lamp life. As depicted below, clean the lamp

module dust filter screen every 200-250 hours when the projector is used in areas with high levels of

airborne contaminants like lint, dust or smoke.

Procedure for cleaning the lamp module dust filter screen

1. First, be sure the projector is cool. Then, remove the lamp door and lamp module.

1 2 ... 143 144 145 146 147 148 149 150 151 152

Keine Kommentare

DTS XD10 Spezifikationen Seite 148